Threaded Pipe Fitting Weights

45 Degree Elbow Weights

Threaded 45 Degree Elbow Fittings are used to change the direction of run pipe to 45-degree. Available from 1/8" up to 4" in pressure class 2000, 3000 and 6000.

90 Degree Elbow Weights

Threaded 90 Degree Elbow Fittings are used to change the direction of run pipe to 90-degree. Available from 1/8" up to 4" in pressure class 2000, 3000 and 6000.

Tees Weights

Threaded Tee Fittings are used to make a 90-degree branch from the run pipe. Available from 1/8" up to 4" in pressure class 2000, 3000 and 6000.

Crosses Weights

Threaded Cross Fittings are used to make a 2 x 90-degree branch from the run pipe. Available in both equal and reducing variation from 1/8" up to 4" in pressure class 2000, 3000 and 6000.

Laterals Weights

Threaded Lateral Fittings are used to make a 45-degree branch from the run pipe. Available in both equal and reducing outlet configuration from 1/8" up to 2-1/2" in Class 3000 and from 1/2" up to 2" in Class 6000.

View Laterals Weights

Caps Weights

Threaded Cap Fittings are used to make an end or closure of any pipe or fittings in a threaded piping system. Available in from 1/8" up to 4" in pressure class 3000 and 6000.

View Caps Weights

Boss Weights

Threaded Boss Fittings are a weld-on connection which provides a self-reinforced, one-piece connection branch outlet from a run pipe. Available in from 1/8" up to 4" in pressure class 3000 and 6000.

View Boss Weights

Coupling Weights

Threaded Coupling Fittings are used to connect two pipes having equal diameter and male threads. Available in from 1/8" up to 4" in pressure class 3000 and 6000.

View Coupling Weights

Half Coupling Weights

Threaded Reducing Coupling Fittings are used to make a branch connection from a larger diameter run pipe to a smaller bore outlet pipe. Available from 1/8" up to 4" in Class 3000 and 6000 and from 1/2" up to 2" in Class 9000.

View Half Coupling Weights

Reducer Coupling Weights

Threaded Reducing Coupling Fittings are used to connect male threaded pipes of different diameters. These basically acts as a reducers in a pipeline. Available in from 1/8" up to 4" in pressure class 3000 and 6000.

View Reducer Coupling Weights

Flush Bushing Weights

Threaded Flush Bushing Fittings are used to connect a reduced size pipe to a larger size female threaded fitting. Available in sizes 1/8” up to 4” as per ASME B16.11.

View Flush Bushing Weights

Couplets Weights

Threaded Couplet Fittings are used to connect two pipes with male threads. Unlike a threaded boss, it is provided with a straight length of weld ring which will be joined to the pipe by means of welding. Available in from 1/8" up to 4" in pressure class 3000 and 6000.

View Couplets Weights

Union Weights

Threaded Union Fittings are used to connect two joints where frequent uncoupling is required. Two end weld pieces are united a centre piece making a temporary joint. These basically acts as a reducer. Available from 1/8" up to 3" in Class 3000 across BS 3799 and MSS-SP-83 standard.

View Union Weights

Hex Bushing Weights

Hex bushings are used to reduce the size of female threads from a larger to a smaller diameter. Available from 1/8” up to 4” across ASME B16.11 and BS 3799 standards.

View Hex Bushing Weights

Hex Plugs Weights

Threaded Hex Plug Fittings are male threaded stoppage fittings used to plug any end of female threaded pipe or fitting to avoid leakage withing the piping system. Available from 1/8” up to 4” across ASME B16.11 and BS 3799 standards.

View Hex Plugs Weights

Round Plugs Weights

Threaded Round Plug Fittings are similar to threaded hex plugs in function but with a round head instead of hex head. Available from 1/8” up to 4” across ASME B16.11 and BS 3799 standards.

View Hex Plugs Weights

Square Plugs Weights

Similar to other threaded plugs, threaded square plugs have similar function but has a protruding square head for wrenching. Available from 1/8” up to 4” across ASME B16.11 and BS 3799 standards.

View Square Plugs Weights

Bull Plugs Weights

Threaded Bull Plug Fittings are used to stop up a hole or close off the end of a line or as an isolation device in piping systems, conduits or wellbore tubulars. Bull plugs provide a means of draining a line during maintenance operations. Available from 1/8” up to 12” as per MSS-SP-95 standard.

View Bull Plugs Weights

Swage Nipple Weights

Threaded Swage Nipple Fittings works like a reducer but it is used to join a buttweld pipe to a Threaded joint. Available in concentric and eccentric variation from ¼” up to 10” outlet across BS 3799 and MSS-SP-95 standard.

View Swage Nipple Weights

Hex Nipple Weights

Find dimensions, tolerances, weights and product availability for din 186 with square neck.

View Hex Nipple Weights

Round Nipple Weights

Threaded Pipe Nipple is usually provided with a male pipe thread (MPT) connection at each end of the fitting, which are used to make a watertight seal when connecting piping to threaded fittings, valves or equipment. Available from 1/8” up to 12” as per ASTM A733 standard specification.