Socket Weld Pipe Fitting Weights

45 Degree Elbow Weights

Socket Weld 45 Degree Elbow Fittings are used to change the direction of run pipe to 45-degree. Available from 1/8" up to 4" in Class 3000, 1/8" to 2" in Class 6000 and from 1/2" up to 2" in Class 9000.

View 45 Degree Elbow Weights

90 Degree Elbow Weights

Socket Weld 90 Degree Elbow Fittings are used to change the direction of run pipe to 90-degree. Available from 1/8" up to 4" in Class 3000, 1/8" to 2" in Class 6000 and from 1/2" up to 2" in Class 9000.

View 90 Degree Elbow Weights

Tees Weights

Socket Weld Tee Fittings are used to make a 90-degree branch from the run pipe. Available in both equal and reducing outlet configuration from 1/8" up to 4" in Class 3000, 1/8" to 2" in Class 6000 and from 1/2" up to 2" in Class 9000.

View Tees Weights

Crosses Weights

Socket Weld Cross Fittings are used to make a 2 x 90-degree branch from the run pipe. Available in both equal and reducing outlet configuration from 1/8" up to 4" in Class 3000, 1/8" to 2" in Class 6000 and from 1/2" up to 2" in Class 9000.

View Crosses Weights

Laterals Weights

Socket Weld Lateral Fittings are used to make a 45-degree branch from the run pipe. Available in both equal and reducing outlet configuration from 1/8" up to 2-1/2" in Class 3000 and 6000 and from 1/2" up to 2" in Class 9000.

View Laterals Weights

Caps Weights

Socket Weld Cap Fittings are used to make a end or closure of any pipe or fittings in a socket weld piping system. Available in both equal and reducing outlet configuration from 1/8" up to 4" in Class 3000 and 6000 and from 1/2" up to 2" in Class 9000.

View Caps Weights

Boss Weights

Socket Weld Boss Fittings are a weld-on connection which provides a self-reinforced, one-piece connection branch outlet from a run pipe. Available from 1/8" up to 4" in Class 3000 and 6000 and from 1/2" up to 2" in Class 9000.

View Boss Weights

Coupling Weights

Socket Welding Coupling Fittings are used to connect two plain end pipes of equal diameter. Available from 1/8" up to 4" in Class 3000 and 6000 and from 1/2" up to 2" in Class 9000.

View Coupling Weights

Half Coupling Weights

Socket Welding Half Coupling Fittings are used to make a branch connection from a larger diameter run pipe to a smaller bore outlet pipe. Available from 1/8" up to 4" in Class 3000 and 6000 and from 1/2" up to 2" in Class 9000.

View Half Coupling Weights

Reducer Coupling Weights

Socket Welding Reducer Coupling Fittings are used to connect two plain end pipes of different diameters. These basically acts as a reducer. Available from 1/8" up to 4" in Class 3000 and 6000 and from 1/2" up to 2" in Class 9000.

View Reducer Coupling Weights

Reducer Insert Weights

Socket Welding Reducer Insert Fittings are used to connect small pipes to larger pipe or fittings by means of insert and weld. Available in different size combination in Class 3000 and 6000 as per MSS-SP-79.

View Reducer Insert Weights

Couplets Weights

Socket Welding Couplet Fittings are used to connect two pipes. Unlike a welding boss, it is provided with a straight length of weld ring which will be joined to the pipe by means of welding. Available from 1/8" up to 4" in Class 3000 and 6000 and from 1/2" up to 2" in Class 9000.

View Couplets Weights

Union Weights

Socket Welding Union Fittings are used to connect two joints where frequent uncoupling is required. Two end weld pieces are united a centre piece making a temporary joint. These basically acts as a reducer. Available from 1/8" up to 3" in Class 3000 across BS 3799 and MSS-SP-83 standard.

View Union Weights

Swage Nipple Weights

Socket Weld Swage Nipple Fittings works like a reducer but it is used to join a buttweld pipe to a socket weld joint. Available in concentric and eccentric variation from ¼” up to 10” outlet across BS 3799 and MSS-SP-95 standard.